This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Gun Modifications/Parts/Accessories / G&G Crane stock butt plate 'cap'?

« on: October 15, 2012, 01:31:37 PM »

I seemed to have misplaced the 'cap' piece that slides onto the back of my G&G GR4's crane stock. Not the butt plate, but the piece that clips onto the back of the stock, that the butt plate then clips on to. I've been searching for a replacement, but all I can find are the butt plates by themselves. Nobody seems to have the cap piece. Anybody know where I can find one of these?

2

Gun Modifications/Parts/Accessories / Re: KSC MP7 Folding Grip Removal?

« on: October 15, 2012, 02:50:58 AM »

I def will! I've been searching for a Wilcox style adapter since I''ve owned my mp7. I was considering custom modding it, but now, it's just apoint of hacking off the grip loop. No drilling holes or anything. I've always thought the mp7 would be so much better if it had a rail on the bottom. Want a forward grip? Use one! Don't want one? Don't put it on! The rail adapter should be here Thursday or Friday.

3

Gun Modifications/Parts/Accessories / Re: KSC MP7 Folding Grip Removal?

« on: October 10, 2012, 01:15:02 AM »

Nevermind, figured it out! mods please remove this thread! Thanks!

4

Gun Modifications/Parts/Accessories / KSC MP7 Folding Grip Removal?

« on: October 10, 2012, 12:25:56 AM »

Hey, I just ordered a Wilcox style RIS rail for my KSC MP7. My MP7 will morph into ultra bad ass mode with a magpul vertical grip in place of the wimpy looking folding grip. I'm aware that I have to hack off the folding grip's loop. First things first though. How do I remove the damn grip and screw parts? Anyone? Thanks a lot!

5

Airsoft News / Re: Evike.com Custom Airsoft Electric Rifle - Pink is Confidence

« on: June 22, 2008, 02:09:23 AM »

I love the part where it says "If you're around the store location, come in and check this masterpiece"

6

Airsoft News / Re: G&G GR16 R4 Commando available for preorder at www.airsoftgi.com

« on: April 10, 2008, 11:05:48 PM »

It won't damage the aeg. That's a bit over the top. I have the newer CQB/r, and the only problem with the charging handle is that, really, it comes out too much. Almost like theres an incorrectly sized spring attached to it or something

7

Clothing/Gear / Re: Finding a Cheap Mich 2001-2002 Helmet

« on: January 10, 2008, 02:49:56 AM »

agreed. i took the rear neck pad off, i find it more comfortable that way.

8

Clothing/Gear / Re: COD 4 loadout q's

« on: January 10, 2008, 12:32:01 AM »

personally, the ball cap underneath a mich 2002 has grown on me, so i picked one up. it is now part of my load out. haha. the sas on overgrown/hunted etc have DPM.

9

Clothing/Gear / Re: Finding a Cheap Mich 2001-2002 Helmet

« on: January 10, 2008, 12:25:16 AM »

evike has the 2002. i just picked one up in OD. great quality for only 35$

10

Clothing/Gear / Re: will the ehobby gp aimpoint be high enough on a jg m4 cqb?

« on: December 30, 2007, 12:22:45 PM »

we all know how llama hates the incorrect usage of "cantilever" haha

11

Clothing/Gear / Re: Wondering if this vest is any good?

« on: December 29, 2007, 05:28:50 PM »

Guarder makes the Weesatch, not the Wasatch. That's a pretty good price for a Phantom one. Also, the guarder doesn't come with the shoulder pads, if that means anything. Great game, great loadouts too. hehe. I actually just ordered an OD MICH 2002 just because I want to rock it over a ball cap. That looks bad ass IMO.

12

Clothing/Gear / Re: will the ehobby gp aimpoint be high enough on a jg m4 cqb?

« on: December 29, 2007, 05:24:03 PM »

If you mean high enough to clear the front sight post, then no, it won't be high enough. The mount included is a low mount, you're going to need a Hi L mount.

13

Clothing/Gear / Re: Will a WE 1911 tactical fit in a SERPA?

« on: December 27, 2007, 11:51:33 PM »

llama, i considered a safariland set up, just too much cash for holster imo. i did hoever see a replica on ebaybanned.com for around the same price as a SERPA. but theres only an m9 and glock version. as for the good news that the WE tactical will fit, thanks alot!

14

Clothing/Gear / Re: Will a WE 1911 tactical fit in a SERPA?

« on: December 27, 2007, 07:46:52 PM »

eh thats too much to spend on holster, imo. thats too bad, i like the SERPA

edit - is there a version that supports railed frames? shortyusa has one, that claims it can accept railed frame 1911's.

15

Clothing/Gear / Will a WE 1911 tactical fit in a SERPA?

« on: December 27, 2007, 06:42:09 PM »

Would like to get one if it would. Looking at the paddle version :

http://www.cabelas.com/cabelas/en/templates/product/standard-item.jsp?_DARGS=/cabelas/en/common/catalog/item-link.jsp_A&_DAV=perf&id=0050116228866a&navCount=1&podId=0050116&parentId=cat601050&masterpathid=&navAction=push&catalogCode=XH&rid=&parentType=index&indexId=cat601050&hasJS=true

16

Gas Discussion / Re: What is a Beretta Centurion???

« on: October 25, 2007, 04:58:49 PM »

standard beretta m92f with a shortened barrel and slide.

17

Gas Discussion / Re: Parts for KJW P 14 ?

« on: October 24, 2007, 11:33:09 PM »

the revamping of this gun seems doubtful. i think I'm just going to get a new WE, the rail frame caspian seems nice. almost punisher style. besides, i realized that i would rather have a single stack. this kjw is now fecal matter out of luck.

18

Gas Discussion / Re: Parts for KJW P 14 ?

« on: October 24, 2007, 07:11:23 PM »

well thats the thing..this gun has been out of service for like, more than a year, due to the fact that i just couldn't find parts for it. It's been sitting around, so I figured why not clean it up and give it some trigger time.

19

Gas Discussion / Re: Parts for KJW P 14 ?

« on: October 23, 2007, 10:53:55 PM »

hmm, will it really? then would a WA wilson recoil set work as well?

20

Gas Discussion / Parts for KJW P 14 ?

« on: October 23, 2007, 09:01:57 PM »

Was wondering if there are any places that carry parts that would fit a KJW para p14. The parts I'm looking for are a slide catch and a recoil set with spring, guide rod and the cap piece that holds the spring in place. im thinking a recoil set from a WA would work, but I've read that the slide catch won't. Any help would but great.

21

Airsoft News / Re: For all of your ACU fans out there, these are the perfect guns for you!

« on: October 23, 2007, 02:14:05 PM »

kind of cool. only if you like acu's as others have mentioned, however. we'll prolly see a MARPAT version sometime soon.

22

Airsoft News / Re: New Guns & Gear

« on: October 22, 2007, 11:32:18 PM »

they are the plastic versions. just bundled with some extra goodies.

23

Clothing/Gear / Re: First Vest Setup

« on: October 07, 2007, 03:14:29 PM »

if you are getting any type of Condor pouch (negating multicam pattern) get it from tacgearstore.com they have the best prices on condor stuff.

24

Clothing/Gear / Re: Return of the phantom ciras maybe

« on: October 07, 2007, 11:54:45 AM »

I saw the new condor PC's at hotspot. they looked unbelievably small.

25

AEG Discussion / Re: G&G GR16 opinions

« on: October 06, 2007, 11:01:33 PM »

the new g&g's are amazing. i recently picked up a new CQB/R. it's very solid and feels freakishly close to a systema or even a real steel. the entire new line comes with a pre-upgraded gear box and its the only aeg that i know of that comes with a tight bore pre installed. it has very nice weight as well. the magnesium receiver is flat black with very nice trades, even though they're G&G trades, but still very cool looking. i run a 9.6v 2000 mah and the thing is beast, i tell you. if you get a model with the crane stock, be sure to get a crane stock battery that will fit into an SRC type crane stock. G&P and CA type crane batteries are no go on the G&G crane stock.