This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

1

Sniper's Perch / AGM mp001 questions

« on: June 20, 2010, 07:19:15 AM »

Im going to buy an agm mp001 sniper rifle soon just for fun and I was wondering if something breaks will vsr 10 parts work in it because I heard that its incompatible with alot of parts? also will most tightbores work or will it tke modification to fit them. thanks

2

AEG Discussion / Re: Tokyo Marui P90 Dual Sector Gear Setup Help

« on: June 17, 2010, 09:01:35 PM »

This reminds me, should I just get a CA Sportline P90? I mean, almost everything from the gearbox is going to be replaced, and the gearbox shell is really the most important stock part. Plus CA externals > TM.

nooooooooooooo not the classic army HS gears wont fit even CA ones because its a unique gun I think or you could buy a tm shell and use that, but I say just buy a tm. Pistons use tm with AOE corrected

3

AEG Discussion II / AGM Stubby killer m4 connector type

« on: June 06, 2010, 01:26:35 PM »

What type battery connectors does an agm stubby m4 have?

4

Gun Modifications/Parts/Accessories / Re: motor for high rof KS P90

« on: May 30, 2010, 02:18:14 PM »

I would go with the G&P m120 or matrix 3000 motor. Also the classic army super high speed is great, in my friends mp5k we got up to 23 rps stock except the motor shimming and a 9.6.

5

Gun Modifications/Parts/Accessories / 13;1 gear questions.

« on: May 27, 2010, 07:41:50 PM »

Hi guys im just wondering will I be able to run 13;1 gears in a p90 shooting 250 fps no teeth removed on the piston. Stock motor and just a 9.6 3800. So now my questions will the 13;1 gears actually be slowing my gun down or will it give it a increase in ROF so how fast will it be shooting? well thanks

6

Gun Modifications/Parts/Accessories / Re: What ROF can i expect for this setup

« on: April 24, 2010, 08:48:00 PM »

Fuzzywuzzy thank you for actually anseweringy question.so you vote g&p over ca why.

7

Gun Modifications/Parts/Accessories / Re: What ROF can i expect for this setup

« on: April 24, 2010, 04:50:12 PM »

My field is cqb hence the 85 spring. also ill say no to the lipo cause i just dont want the hassle of a lipo
so how fast is it going to be?

8

Gun Modifications/Parts/Accessories / What ROF can i expect for this setup

« on: April 24, 2010, 04:26:51 PM »

Alright for the past while I have been working on high speedish setups. So it would be great if you guys could tell if this would be a fast and reliable setup.

-first polish/deburr gearbox and piston rails
-correct the AOE on a stock TM piston
-swiss cheese it alot
-classic army super high speed motor or GP m120 motor which one?
-shimmed perfectly
-sp85 spring by guarder
-deans connectors
-9.6 1600-3800 battery
the base gun will be an echo 1 mp5j im hoping to be in excess of 20 rps. If you guys could give me a guess on the ROF and also any suggestions would be awesome thanks guys.

9

Gun Modifications/Parts/Accessories / Re: About how much much of a ROF increase can I expect with 13:1 gears

« on: April 03, 2010, 06:39:59 PM »

thanks. Slashe12 well my setup is going to be sp85 on a 9.6 with deans and classic army super high speed motor.
SGT thanks. Guys would I have a faster ROf just sticking with a high speed motor and deans. Thanks

10

Gun Modifications/Parts/Accessories / About how much much of a ROF increase can I expect with 13:1 gears

« on: April 03, 2010, 06:02:11 PM »

Right now I am looking at some 13;1 ratio high speed gears for my mp5k. Since all i can really fit into the gun without taping the battery to it (not that i really care about but if I have to I will) is a 9.6 battery.
So about how much of a ROF increase can I expect with these gears on a 9.6 1500maH and well shimmed.
Thanks

11

Gun Modifications/Parts/Accessories / Will a UTG m3 shotgun stock fit a TSD m1014

« on: February 25, 2010, 08:30:06 PM »

DOes the UTG stock fit the tsd m1014 because doesnt the UTG have som long screw in the stock. Thanks

12

Tactics / Re: 40 inch shotgun in cqb?

« on: February 14, 2010, 02:34:54 PM »

SGT thanks for the info well since i already have an mp5 and a g36 i prefer a shotgun beacuse of the grab and go idea ad the challenge. Shotguns, i love em to death so im gonna use one thanks you i appreciate it.

13

Tactics / Re: 40 inch shotgun in cqb?

« on: February 14, 2010, 12:30:58 PM »

Thanks for the quick responses. Well in only like 5 foot six so im not that tall. @ wash warrior yes i guess i had a typo because supressing with a shotgun in pretty much impossible, i might go with just another UTG one like my pistol grip m3 except with the stock the only reason i wanted the tsd one is since it has the long barrel i could mout RIS on it and has flashlights and such. I just love using a shotgun for many reasons.
@ MarineSGT well cqb is all i have because i dont know of any outdoor fields i my area. Well thanks guys.

14

Tactics / 40 inch shotgun in cqb?

« on: February 13, 2010, 06:50:04 PM »

Ok so here's the point I want to buy a TSD m3 because I love the look of the gun and i love shotguns, but the gun is around 40 inches long. I want to know if its doable because since the gun is a shotgun and its hard to supress the enemy with a replica that only shoot how ever fast you can pump the gun. So I just want to know if i could do it without to much trouble. Thanks

15

Skirmish Reports / Re: RuB Core New Zealand - Discerning Airsoft.

« on: December 21, 2009, 08:35:10 PM »

wow thats awesome

16

Tactics / Re: Using a NBB pistol

« on: December 12, 2009, 04:47:35 PM »

cool

17

Tactics / Re: Using a NBB pistol

« on: December 09, 2009, 09:56:53 PM »

very cool guys. yeah we can use co2 at our field just has to be under 335 fps. So this uzi is pretty good right sounds cool I always had a thing for uzi's i guess. yeah ill check it out any other suggestions would be awesome

18

Tactics / Re: Using a NBB pistol

« on: December 06, 2009, 09:00:42 PM »

Yeah glocks are pretty sick . Yeah so good call guys with the TM socom while I was at CQB this weekend this guy was owning with one of those so I might go with one or a Y&p m9. Thanks for the idea with the WE 1911 I will think about that seems pretty awesome.Thanks for the suggestions guys anymore would be welcome.

19

Tactics / Re: Using a NBB pistol

« on: December 04, 2009, 08:35:14 PM »

ok

20

Tactics / Re: Using a NBB pistol

« on: November 29, 2009, 11:09:40 AM »

yeah cool i will are PTPs by KWA any good also is using a NBB in cqb do able though

21

Tactics / Re: Using a NBB pistol

« on: November 29, 2009, 10:18:38 AM »

thanks guys I appreciate it yea i guess il go for a GBB are the KJW's any good

22

Tactics / Using a NBB pistol

« on: November 28, 2009, 08:07:00 PM »

Hi everyone. I'm thinking about using a NBB pistol in CQB  because at the CQB field that I play at alot of people use pistols as there primary weapon. I dont have enough money to get a GBB yet. Do you guys think it would be effective to use a NBB as a primary or at least side-arm to my g36. ALso are there any specific
ways and advantages of having a NBB. Thanks