Home Forums Reviews Classifieds Gallery Chat Calendar Store Map Player Map Links
Please login or register.

Login with username, password and session length
Advanced search  

News:

Pages: [1]   Go Down

Author Topic: How do I take apart a TSD m14  (Read 1497 times)

kahless

  • Private
  • Reputation: +0/-0
  • Offline Offline
  • Posts: 2
    • View Profile
How do I take apart a TSD m14
« on: May 21, 2009, 01:15:16 AM »
I have a jam in barrel
Logged

DJ Mike

  • Colonel
  • ****
  • Reputation: +36/-1
  • Offline Offline
  • Posts: 3330
  • Автоматические пушки для автоматической
    • View Profile
    • Music from the Soundtrack
Re: How do I take apart a TSD m14
« Reply #1 on: May 22, 2009, 04:53:35 AM »
Use an unjamming rod. One should've come with the gun.

Pull the bolt back and hold it, then push the jam out.

To disassemble the gun start taking out the screws. Just remember where they all go!
Logged

kahless

  • Private
  • Reputation: +0/-0
  • Offline Offline
  • Posts: 2
    • View Profile
Re: How do I take apart a TSD m14
« Reply #2 on: May 22, 2009, 03:18:08 PM »
Took it apart and fixed problem, it was not the barrel but a gunk clog in  hop up now in the proses of reassembling it.
Logged

Durandal

  • Private
  • Reputation: +0/-0
  • Offline Offline
  • Posts: 1
    • View Profile
Re: How do I take apart a TSD m14
« Reply #3 on: June 25, 2009, 09:41:32 PM »
My friend is having an issue accessing the part of the TSD M14 where the spring resides.  He wants to measure the spring to get a better one so that I can use it as my Battle Rifle in Airsoft games, and also so I can make the standard annoying fat kid go "WAAAAAAAAH THAT HURT!", because he's a girly man.
Logged

Compass

  • Captain
  • **
  • Reputation: +0/-0
  • Offline Offline
  • Posts: 932
    • View Profile
Re: How do I take apart a TSD m14
« Reply #4 on: June 27, 2009, 07:32:00 PM »
How much has your friend taken down so far?  It shouldn't be that far into the gun regardless.  Remove the rails, remove a few body screws, and then that should be it, should it not?
Logged

dune titan

  • Sergeant
  • *
  • Reputation: +0/-0
  • Offline Offline
  • Posts: 291
  • What's that? You'd be thrilled if you had 5 aces!
    • View Profile
Re: How do I take apart a TSD m14
« Reply #5 on: June 28, 2009, 08:13:48 PM »
The hardest part (when I owned a TSD m14) was taking apart the rear sight, allowing the clamshell body to come apart. The screws stripped on mine, so I had to use other means to remove the back sight  ;D

Also, all plastic internals, so not much upgrade potential. What I would recommend if your friend is crafty is to find and cover up all air leaks, using the teflon or E-tape mod (easily found in snipers perch). And if you really know what your doing, possibly retrofitting an AEG or VSR hop-up unit in the M14, because in my experience the stock hop-up was good for a springer, but could be better if it was metal and had better tolerances.   
Logged
Current Project: Custom ICS Galil SAR - EDGI Barrel - Hybrid LRB Setup - Custom Gas Internals

Gooberz

  • 1 Strike
  • Sergeant
  • *
  • Reputation: +0/-0
  • Offline Offline
  • Posts: 455
    • View Profile
    • Cardella.tk
Re: How do I take apart a TSD m14
« Reply #6 on: July 01, 2009, 02:50:37 AM »
Ancient Chinese Secret: The screws.
Logged

Andreezy

  • Private
  • Reputation: +0/-0
  • Offline Offline
  • Posts: 1
    • View Profile
Re: How do I take apart a TSD m14
« Reply #7 on: July 15, 2009, 02:34:29 AM »
Quote from: Gooberz on July 01, 2009, 02:50:37 AM
Ancient Chinese Secret: The screws.

Teach me your ways! ;D
Logged

Fubar66

  • 2 Strikes
  • Sergeant
  • *
  • Reputation: +0/-0
  • Offline Offline
  • Posts: 178
    • View Profile
Re: How do I take apart a TSD m14
« Reply #8 on: July 28, 2009, 10:31:15 PM »
I had serious fps loss issues with my TSD M14, tried taking it apart to do some teflon modding, and stripped probably every single one of those stupid cheap chinese screws. Great gun for the first week I had it, but it all went downhill from there. Anyways, glad you fixed yours.
Logged

Gooberz

  • 1 Strike
  • Sergeant
  • *
  • Reputation: +0/-0
  • Offline Offline
  • Posts: 455
    • View Profile
    • Cardella.tk
Re: How do I take apart a TSD m14
« Reply #9 on: July 29, 2009, 02:24:01 AM »
Get new screws, or fill the holes with super glue/epoxy. The screws will have more to bite into.
Logged

Nshadow

  • Corporal
  • *
  • Reputation: +0/-0
  • Offline Offline
  • Posts: 77
    • View Profile
Re: How do I take apart a TSD m14
« Reply #10 on: July 30, 2009, 02:47:55 PM »
Quote from: dune titan on June 28, 2009, 08:13:48 PM
The hardest part (when I owned a TSD m14) was taking apart the rear sight, allowing the clamshell body to come apart. The screws stripped on mine, so I had to use other means to remove the back sight  ;D

Also, all plastic internals, so not much upgrade potential. What I would recommend if your friend is crafty is to find and cover up all air leaks, using the teflon or E-tape mod (easily found in snipers perch). And if you really know what your doing, possibly retrofitting an AEG or VSR hop-up unit in the M14, because in my experience the stock hop-up was good for a springer, but could be better if it was metal and had better tolerances.   
I had to cut around mine. Back in the old days when me and my friends all had springers I teflon taped my M14 and fitted a Bar-10 barrel in it with a new bucking. It could easily hit targets past 160 feet.
Logged
Pages: [1]   Go Up
 

Page created in 0.437 seconds with 26 queries.