Print

[dtfgator]

In that case, I apologize.  It looked like the paper thin shim stock and sheet metal you can buy at your local hardware store. 

[bluestripe93]

This looks really good i hope it works,

I was thinking about what you could use for the grip, and the grip from a Well MB04 G-22 looks almost exactly like the one in your reference pic

Look at the 3rd pic
http://www.hitguns.com/PhotoDetails.asp?ShowDESC=N&ProductCode=WELL-MB04-Scope-Bipod

[superwoodle]

Just a little update here:

There were some issues when the parts were being cut, such as the sheet was slightly angled and the cut was not started on the edge. So, not all the parts were cut out. I also had to re-drill all the holes.

[rankross1]

nice i wondered what happened and yes what are you going to do about the grip

[superwoodle]

nice i wondered what happened and yes what are you going to do about the grip

Wood, fiberglass resign and paint. Or get something custom machined which = cash

[Burke]

Now this is turning out to be interesting. Will watch.

[gaspedalpump]

The gap in the trigger gaurd should covered so A.
It doesn't look like a NERF +BOW,

And B.

It'l be more accurate.

[rankross1]

he already covered it and as for the trigger gaurd, idk if thats what your talking about its fine looks cool

[aries35]

theres a guy on airsoft society that does custom guns of all kinds you might want to try and get ahold of him hes made some of the sickst insane custum guns and mods iv ever seen hes vary talented

[rankross1]

so this whole build is for around 100 dollars, wow if you finish you should sell a few

[superwoodle]

theres a guy on airsoft society that does custom guns of all kinds you might want to try and get ahold of him hes made some of the sickst insane custum guns and mods iv ever seen hes vary talented

I would like a custom hop up unit.... I'l see if its in my budget.

The gap in the trigger gaurd should covered so A.
It doesn't look like a NERF +BOW,

And B.

It'l be more accurate.

Ehh too bad.

so this whole build is for around 100 dollars, wow if you finish you should sell a few

I'll probably have to pay to get more parts made, ect. Maby.

[Apotheosis]

The gap in the trigger gaurd should covered

Don't bother. I already tried to convince him of this with no success.

superwoodle, so far its looking like a good start with those parts.

[Soviet Skibum]

I was so confused by that latest picture until I saw the mallet and used it as a size reference.

For a second I thought the rifle was HUGE.

[superwoodle]

I was so confused by that latest picture until I saw the mallet and used it as a size reference.

For a second I thought the rifle was HUGE.

Yea, it turned out to be just the right size.

Anyway, I’m going to try to make a stock pad from a piece of some foam I found on the road that looks like it was part of a bumper or something.

[Apotheosis]

Anyway, I’m going to try to make a stock pad from a piece of some foam I found on the road that looks like it was part of a bumper or something.

Haha. Hey, you work with whatcha got. The plates pieced together looks awesome btw

[Gooberz]

Don't stop there, let's see some more progress!

[superwoodle]

Don't stop there, let's see some more progress!

There were some problems when the parts were being machined. I am missing some parts, and the 1/4" internals havent been cut, so I'm kinda stuck right now.

[rankross1]

how sturdy do you think this is going to be, i mean like is it really wobbly now or with the rest it would be solid

[Rogue Reverend]

I agree with the trigger guard, it looks awesome. It means you can rest your finger in the inside of the opposite guard so your finger is closer to pulling the trigger. BOOM.

[gaspedalpump]

if that was plausible, then it would have already been done.

[Rogue Reverend]

It is plausible! BOOM!

Whats the latest on this anyways?

[gaspedalpump]

...

umm okay?

Anyways, I really am anticipating a new update for the g38.

Hurry up and get those parts mate, and good luck. A build like this doesn't come easy, but you seem to have a good handle on it.

[redmoon3580]

I love your choice of the version 6 gearbox. Are you going to be trying to make this set up high speed?

[rankross1]

high speed with that big of a barrel, i hope he goes dmr or just standard universal assualt rifle type

[gaspedalpump]

The way that gun is designed, it can fit both roles.